NEWS
Your current location:
Homepage
>
>
How to choose materials for notepad customization?

How to choose materials for notepad customization?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-02-17
  • Views:0

(Summary description)Customized notepads generally use PVC, PU, ​​artificial leather, leather, Italian imported discolored leather, medium and high-end hardcover leather. For notepad customization, how to choose the appropriate materials to make notepads is very important. So how can we choose the most suitable material?

First we have to learn to identify materials. When identifying, first check the materials to determine the type of leather. If the "dermis" grain layer is not modified and has the original natural characteristics: the leather pores are small, irregular and uniform; the rows of goat skin pores are "tile"; the pigskin has three holes , Showing the word distribution.

The calf leather has fine fibers, the buffalo leather is rough, and the pores are large. For the grain layer that has lost its original characteristics after modification, it should be carefully classified and identified according to the processing technology. It is called aniline leather coated with aniline, which is characterized by a shiny surface, very bright, non-glare, and no plastic. Natural leather is cooked into leather. The cowhide is generally 5-6mm thick. The surface layer is a grain layer. The tissue fibers are fine and tight, smooth and beautiful, and the strength and abrasion resistance are good. There are fluff on the surface. The top leather is smoother and flatter than the second leather, and the second leather is slightly rougher. The surface of two-layer leather can be roughened by coating, transfer film or film, but transfer film leather has poor low temperature resistance, and wrinkles easily occur at low temperature. The cowhide two-layer leather is flat and has no obvious defects after embossing, while the pigskin two-layer leather often has three piles of pores faintly visible, where the gloss is dull. Note that when distinguishing between nubuck leather and front leather, the nubuck leather destroys the original grain layer and then presses the pattern. The type of pattern can imitate cattle, sheep, pigskin, etc., but the pattern has no pores and the pattern is floating On the surface of the skin, the front pores of the leather are present, which can be identified by careful observation.

Artificial leather is coated with a layer of organic material on the cloth base, and it is divided into thin (imitation sheepskin) and thick (coated with foamed organic material, and then pressed on the pattern). Synthetic leather is made by pressing with organic fibers and adding lamination. Recycled leather is made by grinding the dregs and fibers, and bonding them with a high-pressure adhesive to form a sheet. Then the sheet is machined to the required thickness and then coated to make it have certain leather characteristics. It is widely used in luggage. Leather goods, a small amount used to make shoes. Look at the appearance when distinguishing between genuine leather and artificial materials. Genuine leather has no substrate, and artificial materials have a substrate. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. Using the thumb to press the softer part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. The thumb is lifted, and the pattern disappears; while artificial materials may not have a pattern, or rough lines may appear. When the thumb is lifted, the pattern does not disappear. , Indicating that the grain layer on the surface of the material and the underlying network layer have been separated. You can also distinguish the dermis or artificial leather by observing the cross section. The cross section of the dermis is composed of irregular fibers. After scraping the broken fibers with your fingernails, the cross section has no obvious change. For the dermis, the different parts + texture are irregular, and the nose smells with a foul smell. Artificial leather smells plastic or rubber, and the texture of each part is consistent. Foil leather is an artificial surface layer on the loose flesh fiber layer under the natural leather. It can not be called "dermis", but a synthetic leather with a natural leather inner layer as the base.

In summary, it can be viewed from the following aspects: A. Look. Look at the appearance first, the leather has no foundation, the artificial material has a foundation; the leather has small pores, and the imitation leather does not. B. touch. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. C. smell. The genuine leather smells of animal fat (ie, the smell of the skin), while the imitation leather smells of plastic. D. Pressure. With the thumb pressing the soft part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. When the thumb is lifted, the

How to choose materials for notepad customization?

(Summary description)Customized notepads generally use PVC, PU, ​​artificial leather, leather, Italian imported discolored leather, medium and high-end hardcover leather. For notepad customization, how to choose the appropriate materials to make notepads is very important. So how can we choose the most suitable material?

First we have to learn to identify materials. When identifying, first check the materials to determine the type of leather. If the "dermis" grain layer is not modified and has the original natural characteristics: the leather pores are small, irregular and uniform; the rows of goat skin pores are "tile"; the pigskin has three holes , Showing the word distribution.

The calf leather has fine fibers, the buffalo leather is rough, and the pores are large. For the grain layer that has lost its original characteristics after modification, it should be carefully classified and identified according to the processing technology. It is called aniline leather coated with aniline, which is characterized by a shiny surface, very bright, non-glare, and no plastic. Natural leather is cooked into leather. The cowhide is generally 5-6mm thick. The surface layer is a grain layer. The tissue fibers are fine and tight, smooth and beautiful, and the strength and abrasion resistance are good. There are fluff on the surface. The top leather is smoother and flatter than the second leather, and the second leather is slightly rougher. The surface of two-layer leather can be roughened by coating, transfer film or film, but transfer film leather has poor low temperature resistance, and wrinkles easily occur at low temperature. The cowhide two-layer leather is flat and has no obvious defects after embossing, while the pigskin two-layer leather often has three piles of pores faintly visible, where the gloss is dull. Note that when distinguishing between nubuck leather and front leather, the nubuck leather destroys the original grain layer and then presses the pattern. The type of pattern can imitate cattle, sheep, pigskin, etc., but the pattern has no pores and the pattern is floating On the surface of the skin, the front pores of the leather are present, which can be identified by careful observation.

Artificial leather is coated with a layer of organic material on the cloth base, and it is divided into thin (imitation sheepskin) and thick (coated with foamed organic material, and then pressed on the pattern). Synthetic leather is made by pressing with organic fibers and adding lamination. Recycled leather is made by grinding the dregs and fibers, and bonding them with a high-pressure adhesive to form a sheet. Then the sheet is machined to the required thickness and then coated to make it have certain leather characteristics. It is widely used in luggage. Leather goods, a small amount used to make shoes. Look at the appearance when distinguishing between genuine leather and artificial materials. Genuine leather has no substrate, and artificial materials have a substrate. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. Using the thumb to press the softer part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. The thumb is lifted, and the pattern disappears; while artificial materials may not have a pattern, or rough lines may appear. When the thumb is lifted, the pattern does not disappear. , Indicating that the grain layer on the surface of the material and the underlying network layer have been separated. You can also distinguish the dermis or artificial leather by observing the cross section. The cross section of the dermis is composed of irregular fibers. After scraping the broken fibers with your fingernails, the cross section has no obvious change. For the dermis, the different parts + texture are irregular, and the nose smells with a foul smell. Artificial leather smells plastic or rubber, and the texture of each part is consistent. Foil leather is an artificial surface layer on the loose flesh fiber layer under the natural leather. It can not be called "dermis", but a synthetic leather with a natural leather inner layer as the base.

In summary, it can be viewed from the following aspects: A. Look. Look at the appearance first, the leather has no foundation, the artificial material has a foundation; the leather has small pores, and the imitation leather does not. B. touch. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. C. smell. The genuine leather smells of animal fat (ie, the smell of the skin), while the imitation leather smells of plastic. D. Pressure. With the thumb pressing the soft part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. When the thumb is lifted, the

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-02-17
  • Views:0
Information
Customized notepads generally use PVC, PU, ​​artificial leather, leather, Italian imported discolored leather, medium and high-end hardcover leather. For notepad customization, how to choose the appropriate materials to make notepads is very important. So how can we choose the most suitable material?
 
First we have to learn to identify materials. When identifying, first check the materials to determine the type of leather. If the "dermis" grain layer is not modified and has the original natural characteristics: the leather pores are small, irregular and uniform; the rows of goat skin pores are "tile"; the pigskin has three holes , Showing the word distribution.
 
The calf leather has fine fibers, the buffalo leather is rough, and the pores are large. For the grain layer that has lost its original characteristics after modification, it should be carefully classified and identified according to the processing technology. It is called aniline leather coated with aniline, which is characterized by a shiny surface, very bright, non-glare, and no plastic. Natural leather is cooked into leather. The cowhide is generally 5-6mm thick. The surface layer is a grain layer. The tissue fibers are fine and tight, smooth and beautiful, and the strength and abrasion resistance are good. There are fluff on the surface. The top leather is smoother and flatter than the second leather, and the second leather is slightly rougher. The surface of two-layer leather can be roughened by coating, transfer film or film, but transfer film leather has poor low temperature resistance, and wrinkles easily occur at low temperature. The cowhide two-layer leather is flat and has no obvious defects after embossing, while the pigskin two-layer leather often has three piles of pores faintly visible, where the gloss is dull. Note that when distinguishing between nubuck leather and front leather, the nubuck leather destroys the original grain layer and then presses the pattern. The type of pattern can imitate cattle, sheep, pigskin, etc., but the pattern has no pores and the pattern is floating On the surface of the skin, the front pores of the leather are present, which can be identified by careful observation.
 
Artificial leather is coated with a layer of organic material on the cloth base, and it is divided into thin (imitation sheepskin) and thick (coated with foamed organic material, and then pressed on the pattern). Synthetic leather is made by pressing with organic fibers and adding lamination. Recycled leather is made by grinding the dregs and fibers, and bonding them with a high-pressure adhesive to form a sheet. Then the sheet is machined to the required thickness and then coated to make it have certain leather characteristics. It is widely used in luggage. Leather goods, a small amount used to make shoes. Look at the appearance when distinguishing between genuine leather and artificial materials. Genuine leather has no substrate, and artificial materials have a substrate. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. Using the thumb to press the softer part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. The thumb is lifted, and the pattern disappears; while artificial materials may not have a pattern, or rough lines may appear. When the thumb is lifted, the pattern does not disappear. , Indicating that the grain layer on the surface of the material and the underlying network layer have been separated. You can also distinguish the dermis or artificial leather by observing the cross section. The cross section of the dermis is composed of irregular fibers. After scraping the broken fibers with your fingernails, the cross section has no obvious change. For the dermis, the different parts + texture are irregular, and the nose smells with a foul smell. Artificial leather smells plastic or rubber, and the texture of each part is consistent. Foil leather is an artificial surface layer on the loose flesh fiber layer under the natural leather. It can not be called "dermis", but a synthetic leather with a natural leather inner layer as the base.
 
In summary, it can be viewed from the following aspects: A. Look. Look at the appearance first, the leather has no foundation, the artificial material has a foundation; the leather has small pores, and the imitation leather does not. B. touch. Touch it again with your hand. The artificial material has a very strong plastic feel and bright luster. It feels cold and cold in the winter, and smooth leather without the cold. C. smell. The genuine leather smells of animal fat (ie, the smell of the skin), while the imitation leather smells of plastic. D. Pressure. With the thumb pressing the soft part of the finished product, there will be many small, uniform patterns on the dermis around the thumb. When the thumb is lifted, the pattern disappears, that is, the dermis; while artificial materials may have no pattern or coarse lines, and the thumb is lifted. The pattern does not disappear, indicating that the grain layer on the surface of the material and the underlying network layer have been separated. E. Check. Observing the cross section, the cross section of the dermis is composed of irregular fibers. After scraping off the broken skin fibers with a fingernail, the cross section has no obvious change. For the dermis, the texture of different parts is irregular, and the nose smells fishy, ​​while the artificial leather smells plastic or rubber The taste and texture of each part are consistent. Film leather is an artificial surface layer on the loose flesh fiber layer under the natural leather. It can not be called "dermis", but a synthetic leather with a natural leather inner layer as the base. F. water. Place small water droplets on the surface of the skin. After a few minutes, the water droplets diffuse through the pores. You can see obvious wet spots and absorb moisture. G. burn. The edges of the burnt skin have a scorched hair, while the imitation leather has a plastic smell. H. color. The leather color is dull and soft, while the imitation leather is bright.

Scan the QR code to read on your phone

Contact us

Contact :Miss Liu
Tel:
0769-86718839
E-mail:sell2@dgdaqin.com

Add: Daqin leather factory, Xiajie Industrial Area, Qishi Twon, Dongguan City, Guangdong Province, P.R.China

关注我们

Mobile QR

Webpage Copyright (c) Dongguan City Daqin Leather Co.,LTD.       粤ICP备16044082号       Powered by www.300.cn

搜索
Search